Technical Articles

What are the basic requirements for outdoor installation of distribution transformers? There are several types of transformer measurements, I dont know what your purpose of measurement is. There are usually measurements of unpowered and pow...

Why put pebbles under the transformer? Why have water? We can often see that a lot of pebbles are placed under some transformers, so what are these pebbles used for? Is it just for aesthetics? Why put pebbles under the transformer? Whats un...

1、Overview of Pad mounted transformer 1.1 the technical specification of the equipment is applicable to 10kV / 11kv Pad mounted transformer. The technical specification puts forward the technical requirements for the functional design, st...

The IK code indicates the protection level of the electrical product shell against harmful mechanical collision. The identification indicates that the protection level of the shell against external mechanical collision shall be marked with...

The transformers installed in the main substation and the 6kV substation often with personnel on duty shall monitor the operation of the transformer according to the appearance on the control panel and read the meter once an hour. 2. For sub...

As there is an open space in the silicon steel sheet joint of the transformer core, the magnetic flux increases sharply through the joint, so the magnetic flux has to bypass the open space of the joint and enter the adjacent laminations thro...

4. A hole seat for measuring temperature shall be set on the transformer to pierce the mercury thermometer to measure the temperature. 5. The transformer shall be provided with a nameplate, which shall indicate the coil wiring diagram and wi...

Distribution box model and number GCK, GCS and MNS are low-voltage draw out switchgear; GGD, GDH and PGL are low-voltage fixed switchgear; Xzw integrated distribution box; Zbw box type substation; 40. GXL low voltage distribution cabinet...