HENGFENGYOU ELECTRIC --SMART ELECTRIC GLOBAL SERVICE PROVIDER
   

current position:Home page > COMPANY > Technical Articles >

Electrical Certification in major countries worldwide, super detailed (ongoing update...)

Writer: Hengfeng you electric Time:2021-07-28 views:times

Electrical Certification in major countries worldwide, super detailed (ongoing update...)
Hengfengyou electric, electrical certification, electrical qualification
1、 IEC introduction:
IEC is the abbreviation of International Electrotechnical Commission, which was formally established in London in October 1906. It is the first International Electrotechnical Standardization Organization established in the world. It is responsible for the development of international standardization in the field of electrical engineering and electronic engineering. The purpose of IEC is to promote international cooperation in standardization and related issues in the field of electrical and electronic engineering and to enhance mutual understanding among the international. Most of the electrical standards in China are in accordance with IEC standards. CE, CB and ISO9001 quality system certification is suitable for most countries in the world, and the export of other countries only requires CNAs and CCC certification.

 Major national electrical certification (updated...)
1. CB certification (IEC is only a name of an institution, and we usually refer to IEC certification as CB certification): CB report is a standardized report, which lists the requirements of relevant IEC standards in a list by item form. National Certification Agency (NCB) is the certification institution that issues the national certification certificate to the electrical products, The member states participating in the CB system include the major exporters of all China's mechanical and electrical products:
Applicable countries (51 countries): Argentina, Austria, Australia, Belarus, Belgium, Brazil, Canada, China, Czech Republic, Germany, Denmark, Spain, Finland, France, UK, Greece, Hungary, India, Ireland, Israel, Italy, Japan, South Korea, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal Russia, Romania, Singapore, Slovakia, Slovenia, South Africa, Turkey, Ukraine, United States, Yugoslavia, Switzerland, Malaysia, Sweden, Thailand, UAE, Saudi Arabia, Pakistan, Bulgaria, Uruguay.

2. CE certification (Compulsory Certification of European electrical):
CE in the European market "CE" mark is a mandatory certification mark, which is regarded as a passport opened and entered the European market by the manufacturer. CE represents the European unity.
Applicable countries: Austria, Belgium, Bulgaria, Cyprus, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain Sweden, UK

3. EAC certification (Declaration of self-compliance)
Certificate of technical regulations certification of Customs Union, Russian: технических регламентов Таможенного союза сертификатов соответствия/ деклараций о соответствии,
TP tc. English: technical regulations of the customers union conformity certificates / declarations of conformity (TR Cu certification or Cu TR) because the certification mark is EAC mark. Eurasian Economic Union (EEU or eaeu) includes Russia, Belarus, Kazakhstan, Armenia, Kyrgyzstan, Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan. Products sold on the market must comply with the technical regulations of Customs Union (Cu TR).

4. CNAS is a combination of the National Accreditation Committee of the original China certification body (CNAB) and the former China Laboratory National Accreditation Commission (CNAL). CNAs shall, through evaluation and supervision of the management and activities of the qualification assessment institutions (such as certification agencies, laboratories and inspection institutions), confirm whether they are capable of carrying out corresponding qualification assessment activities (such as certification, testing and calibration, inspection, etc.), confirm the authority of their qualification assessment activities and play the role of recognition and restriction.
5. CQC is the earliest, largest and authoritative certification institution in China to carry out quality certification. In recent decades, CQC has accumulated rich international quality certification experience, and has achieved remarkable achievements in various businesses. The number of certified customers ranks first in the national certification organization and the top of the global certification organization

6. CCC certification is "China Compulsory Certification", its English name is "China comprehensive certification", abbreviated as CCC. CCC certification is marked "CCC", which is a product certification system formulated by the national certification and accreditation supervision and Administration Commission in accordance with the provisions on the administration of compulsory product certification (Order No. 5 of the State Administration of quality supervision, inspection and Quarantine of the people's Republic of China).

7. FSC certification
It is a form of forest certification, which is for enterprise traceability certification, including FM certification and COC certification.

8. UL certification
It is a short-term written by the Underwriters Laboratories Inc. UL certification is a non mandatory certification in the United States, mainly in the detection and certification of product safety performance. Its certification scope does not include EMC (electromagnetic compatibility) characteristics of the products.

9. CSA is the abbreviation of Canadian Standards Association. Founded in 1919, it is the first non-profit institution in Canada to set industrial standards. Electronic, electrical, sanitary and gas products sold in North America need to be certified in terms of safety. Currently, CSA is the largest security certification agency in Canada and one of the most famous security certification institutions in the world. It can provide safety certification for all kinds of products in machinery, building materials, electrical appliances, computer equipment, office equipment, environmental protection, medical fire safety, sports and entertainment. CSA has provided certification services to thousands of manufacturers around the world, and hundreds of millions of products with CSA logo are sold in North America every year

10. SAA certification is a standard organization in Australia, which is certified by Standards Association of Australia, so many friends call it Australian certification. Electrical products entering the Australian market must be SAA certified. SAA has two main signs, one is formal recognition and the other is standard mark. Formal certification is only for samples, and standard marks are subject to Factory review for each. The certification scope of SAA is mainly divided into quality management system; Environmental management system; Occupational health and safety management; Information security management; The application period for SAA certification for common products is 3-4 weeks, and the date may be extended if the product quality is not up to standard. If the product delivered is not certified, the product or fine will be detained or confiscated.

11. PSE certification is a mandatory safety certification in Japan to prove that the motor and electronic products have passed the safety standard test of Japanese electrical and raw material safety law or international IEC standard. According to the national law of Japan (electric device and material control law), 498 products must pass safety certification when entering the Japanese market. Among them, 165 class a products shall obtain diamond shaped PSE mark and 333 class B products shall obtain round PSE mark

12. EK certification
The type approval system regulated by the Korean government has been replaced by the new safety certification system. The new certification work is undertaken by several private enterprises. They are KTL, Keti, esak, and the newly revised electrical safety regulation act 6019 was promulgated on September 7, 1999. The newly revised electrical safety regulations have been improved in strengthening the safety control of production and use of electrical appliances, and also made the safety standards more international so that they can be recognized by many countries in the future. The new electrical safety regulations were officially implemented on July 1, 2000. All electrical products with power supply voltage within 50V to 1000V shall be certified.

13. TUV t ü V mark is a safety certification mark specially designed for components and components in Germany, and it has been widely accepted in Germany and Europe. At the same time, enterprises can apply for CB certificates in combination when applying for the t ü V mark, thus obtaining certificates from other countries through conversion. Moreover, after the products pass the certification, German t ü V will go forward to inquire the rectifier machine factory of qualified component suppliers to recommend these products; In the process of the whole machine certification, all the components with t ü V mark can be exempted from inspection.
BV, the Breau Veritas, is headquartered in Paris, with many branches and laboratories around the world, among which product certification is one of the main businesses.

14. GS means "Gepr ü FTE Sicherheit" (security has been certified) and also "German safety". GS certification is a voluntary certification based on the German product safety law (GPGs), which is tested according to the European Union unified standard EN or German industrial standard DIN, and is recognized as the German safety certification mark in the European market.

15. SABS certification
SABS is a neutral third-party certification agency in South Africa, responsible for system certification and product certification in South Africa.

16. SGS certification
Swiss general notary public
It refers to the service that SGS performs compliance certification for the objectives according to the standards, regulations, customer requirements and other conditions. To carry out relevant certification, the certificate such as COC can be obtained through inspection, testing, identification, certification and other means (SGS certification is not a certification itself, but refers to the certification service of SGS)

17. BIS certification (compulsory certification necessary for export):
The export of electronic products to India requires bis certification. Bis: BIS is a product certification agency in India. It is authorized by the Indian Congress to implement the product certification system and regulations in accordance with the Indian Standards Bureau Act 1986

18. EU (former customs union) Cu tr certification (EAC certification) gost certification
Eurasia technical regulations / customs union technical regulations certification certificate, Russian: технических регламентов Таможенного союза сертификатов соответствия/ деклараций о соответствии, TP tc. English: technical regulations of the customers union conformity certificates / declarations of conformity (TR Cu certification or Cu TR) is also called EAC certification because the certification mark is EAC mark.
Because the Customs Union regulations stipulate that from February 15th, 2013, all products belonging to the jurisdiction of the customs union cu-tr (EAC certification) must apply for cu-tr certification. The logo is EAC.
The cu-tr certificate of Customs Union has been registered and filed on the official website of Customs Union, which can be inquired.
The Cu tr certificate of customs union is common in Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan.
Cu tr certification of Customs Union: it is divided into Cu tr certificate and Cu tr declaration

19. COC (certificate of compliance) customs clearance certificate
SASO = Saudi Arabian Standards Organization.
According to SASO, each batch of export goods shall have COC Certificate (certificate of conformity) when exporting to Saudi Arabia. Issuing agency SGS, BV, its, etc
SGS can provide pre import inspection and testing of Iraqi goods, conformity assessment of Syrian products exported (icigi), Nigeria product conformity assessment (COC), Saudi product conformity assessment scheme (COC), Kuwait product conformity assessment (COC), Kenya product conformity assessment (COC), Zambia pre export conformity assessment (PVOC), Algerian product conformity assessment (COC)
Bv can provide 12 compliance testing countries: Kenya, Tanzania, Iraq, Zambia, Saudi Arabia (SASO), Algeria (COC), Iran (VOC &psi), Kuwait (kucas), Lebanon (COC), Syria (COC &vor), Uganda (COC), Yemen (COC), Ecuador (COC), Russia (gost R); 14 pre shipment inspection countries: Bangladesh, Philippines, Indonesia, Somalia, Guinea, Central African Republic, Congo (Jin), Angola, c'Ivoire, Ghana, Benin, Chad, Mali, Liberia, Mexico (CDV); One destination port inspection country: Ghana

20. The short name of SNI certification is the only standard applicable in Indonesia, which is formulated by the Indonesian Technical Committee and defined by the National Standards Bureau of Indonesia.

21. The UC certification in Brazil is formerly called the uniaocertificadora certification, which is the security certification of Brazil, which is divided into two types: mandatory and voluntary certification. For products applying for compulsory UC certification, the instruction manual must be Portuguese. The manual of the voluntary UC certification products can be accepted in English, Spanish and Portuguese.

Kema certification (STL member)
Kema, founded in 1927, is an independent leading enterprise in science and technology. It provides global high-quality services in the energy industry chain, including business and technical consulting, operation support, measurement and testing, testing and certification. Kema provides neutral advice and support to producers, suppliers, users and government agencies of electricity and other forms of energy. In addition, the company also provides certification services for products, systems and individuals for many customers.
ASTA certification (STL member)
British Bai certification provides safety certification and services for power connection devices, components and other Du products.
The ASTA type test certificate provides Dao authoritative objective evidence to prove that the customized equipment complies with relevant safety standards. The certificate can be used to support the technical documents related to the EU CE mark.
ASTA type test certification is especially suitable for a small amount of or "customized" equipment. When one or more samples are tested according to the requirements of product safety standards, ASTA type test certification will provide you with an independent compliance inspection certification. The issued document is now called "ASTA type test certificate".
In terms of certification process, most countries have the same certification process, but China, Thailand, Cambodia, Indonesia and Vietnam need to pass the first factory inspection in the certification process, while other countries do not need factory inspection.
Member of STL international short circuit Alliance
 



CATEGORIES

Recommended reading

Contact us

WhatsApp:

+86 15853252696(Jack)

+86 158 5326 5269(Alisa)

Tel:+86-532-87936206

Fax:+86-532-87936207

Email: hfy@hengfengyou.com

Address: 506 Huicheng Road, Chengyang District, Qingdao City, China

Leave a message now - get the latest industry insights, star products, and success stories of hengfengyou electric

© 2021 Copyright By Hengfengyou Electric

xml map    |    Site map

whatsapp
(+86) 15853252696
WhatsApp Click Contact